| Brand |
Model |
Year |
SRS |
DRS |
|
|
|
|
|
| Astrix |
Stryke |
05 |
|
No Fit |
| Azonic |
Propulsion |
03-04 |
OK |
OK |
| Azonic |
Saber FR |
03-04 |
OK |
OK |
| Azonic |
Eliminator DH |
03-04 |
OK |
OK |
| Azonic |
Recoil DH |
03-04 |
OK |
OK |
| Balfa |
2 Step |
03 |
No Fit |
No Fit |
| Balfa |
BB7 |
02-03 |
See Setup Instructions above |
No Fit |
| Banshee |
Scirocco |
05 |
OK |
OK |
| Banshee |
Chaparrel |
03-04 |
OK - but not ideal rotation on the SRS, the STS
gets better rotation, trim inner lower wearplate to get better rotation in
long travel position |
Need to run a 118 spindle to get the bashguard to
clear the chainstay - Use a 118 x 68/73 BB without spacer to get the
non-drive crankarm to clear the chainstay |
| Banshee |
Scream |
03-04 |
OK - but not ideal rotation on the SRS, the STS
gets better rotation, trim inner lower wearplate to get better rotation in
long travel position |
Mount using BB flange only - OK to trim inner
wearplate to get a little better rotation |
| Banshee |
Morphine |
03-04 |
OK |
Mount using BB flange only - OK to trim inner
wearplate to get a little better rotation |
| Brodie |
Diablo |
03 |
OK |
|
| Cannondale |
Chase |
04 |
ISCG tabs are off according to www.iscg.com -
contact Cannondale directly for appropriate ISCG adapter |
ISCG tabs out of alignment according to www.iscg.com
- Mount using BB flange only |
| Cannondale |
Gemini |
02-05 |
Use Gemini specific SRS backplate
The STS backplate fits fine |
ISCG tabs out of alignment according to www.iscg.com
- Mount using BB flange only |
| Cannondale |
Gemini DH |
03-04 |
Use Gemini specific SRS backplate
The STS backplate fits fine |
|
| Cannondale |
Prophet |
05 |
Use Gemini specific SRS backplate
The STS backplate fits fine |
Use E-Type DRS backplate |
| Clif Cat |
Turmoil |
05 |
OK |
|
| Commencial |
Supreme DH |
05 |
No Fit |
|
| Cove |
G-Spot |
02-04 |
Use 2mm spacer behind backplate and use 118mm BB |
No Fit |
| Cove |
Hooker |
04-05 |
TBD |
No Fit |
| Cove |
Playmate FR |
04 |
OK |
OK |
| Cove |
Peeler DH |
04 |
OK |
|
| DeVinci |
Ollie |
05 |
|
OK |
| DeVinci |
Wilson |
05 |
OK |
|
| DeVinci |
Daredevil |
05 |
OK |
|
| Ellsworth |
Joker |
04 |
OK |
OK |
| Ellsworth |
Moment |
05 |
OK |
|
| Ellswoth |
Dare - 135 rear end |
02-04 |
OK |
OK |
| Ellsworth |
Dare - 150 rear end |
02-04 |
No Fit |
No Fit |
| Ellsworth |
Specialist |
05 |
OK |
|
| Evil |
Imperial |
02-05 |
OK |
OK |
| Evil |
Imperial SL |
05 |
OK |
OK |
| Evil |
D.O.C. |
05 |
OK |
OK |
| Evil |
Sovereign |
05 |
OK |
OK |
| Fetish |
Fixation |
05 |
OK |
OK |
| Fetish |
Obsession |
05 |
OK |
OK |
| Fetish |
Temptation |
05 |
OK |
OK |
| Fetish |
Lust |
05 |
OK |
|
| Foes |
FXR |
05 |
No Fit |
|
| Foes |
Inferno |
05 |
No Fit |
|
| Foes |
Fly |
02-04 |
OK |
OK |
| Foes |
Fly |
05 |
w/ 150mm rear end flip the ISCG adapter plate
outbound |
See Setup Instructions above |
| Foes |
DHS |
All |
No Fit |
No Fit - not front der. Compatible |
| Giant |
DH |
01-04 |
Flip the ISCG adpter plate outbound |
|
| Giant |
ATX - DH |
01 |
Must use a 128mm BB to have backplate clear the AC
guide mount, to use shorter BB the AC mount must be removed from frame |
|
| Giant |
STP series |
04-05 |
OK |
|
| Giant |
AC-1 or 2 |
03-04 |
OK |
|
| Giant |
Warp |
03-04 |
OK |
|
| Giant |
Faith |
05 |
TBD |
|
| Giant |
Reign |
05 |
No Fit |
Modification needed to the backplate |
| Intense |
5.5 |
05 |
OK |
OK |
| Intense |
Tazer |
05 |
OK |
|
| Intense |
M1 |
02-03 |
Use e13 M1 specific ISCG adapter plate to get
proper ISCG and backplate rotation |
|
| Intense |
M1 |
04 |
OK |
|
| Intense |
VPX |
05 |
OK - backplate may need minor mod if using a 113
spindle |
|
| Intense |
M3 |
05 |
See Setup Instructions above |
|
| |
|
|
|
|
| Karpiel |
Disco-Volante |
|
OK |
|
| Karpiel |
Armageddon |
02-04 |
See Setup Instructions above |
|
| Knolly |
V-Tach |
04-05 |
|
Use DRS E-Type backplate |
| Kona |
Shred |
04-05 |
OK |
OK |
| Kona |
Scrap |
04 |
OK |
OK |
| Kona |
Chute |
03 |
OK |
OK |
| Kona |
Coiler Series |
04-05 |
OK |
|
| Kona |
Stab |
05 |
OK |
|
| Kona |
Stab DC |
03 |
OK - but 44T bashguard is a tight fit with a 118
spindle |
OK |
| Kona |
Stab Supreme |
04-05 |
OK |
|
| Kona |
Stinky |
03 |
OK |
|
| Kona |
Stinky |
04-05 |
No Fit - ISCG adapter plate overlaps with main
pivot |
|
| Kona |
Stinky Primo |
04 |
No Fit - ISCG adapter plate overlaps with main
pivot |
|
| Kona |
Stinky Dee-Lux |
04-05 |
To get the ISCG Adapter Plate to clear the main
pivot a 2.5 mm spacer must be placed between the adapter plate and BB shell |
OK |
| Marin |
Mount Vision |
04-05 |
|
OK |
| Norco |
Atomik |
03-04 |
|
OK |
| Norco |
Launch |
03-04 |
OK |
|
| Norco |
Sasquatch |
03-04 |
|
OK |
| Notco |
VPS Series |
04-05 |
OK |
Backplate does not clear main pivot - Use 1mm spacer
behind backplate to clear the main pivot |
| Norco |
Shore |
01-04 |
|
Backplate does not clear main pivot - Use 1mm spacer
behind backplate to clear the main pivot |
| Norco |
Shore |
05 |
|
OK |
| Norco |
Team DH |
05 |
OK |
|
| Orange |
Patriot |
04-05 |
|
OK |
| Orange |
Patriot 66 |
04-05 |
|
OK |
| Orange |
7 + |
03-05 |
|
OK |
| Orange |
223 DH |
05 |
ISCG tabs are off according to www.iscg.com - use
ISCG adapter plate to get proper rotation of backplate |
OK |
| Rocky Mountian |
Flow 24 |
04-05 |
OK |
OK |
| Rocky mountain |
Switch |
04-05 |
OK |
OK |
| Rocky Mountain |
RM-7 |
03 |
OK |
|
| Rocky Mountain |
RMX R-2 |
05 |
|
OK |
| Santa Cruz |
V-10 |
03-04 |
Flip ISCG adapter plate outbound, For a 135mm rear
end use a 123mm BB, For a 165mm rear end use a 128mm BB |
No Fit - not front der. Compatible |
| Santa Cruz |
V-10 |
05 |
OK - flip ISCG adapter plate outbound |
|
| Santa Cruz |
VP-Free |
04 |
OK - flip ISCG adapter plate outbound |
See Setup Instructions above |
| Santa Cruz |
Bullit |
01-04 |
Use a 118 spindle to get more tire / backplate
clearance if necessary |
See Setup Instructions above |
| Santa Cruz |
Heckler |
04-05 |
|
See Setup Instructions above |
| Santa Cruz |
Cameleon |
03-05 |
OK |
OK |
| Scott |
High Ooctane |
05 |
STS fits fine - SRS Instructions coming soon |
OK |
| Specialized |
P.1 |
04 |
OK |
OK |
| Specialized |
P.2 |
04 |
OK |
OK |
| Specialized |
P.3 |
04 |
OK |
OK |
| Specialized |
Big Hit |
05 |
OK when in low BB position |
Use DRS E-Type backplate. |
| Specialized |
Big Hit Comp |
04 |
OK when in low BB position |
Use DRS E-Type backplate. |
| Specialized |
Big Hit DH |
01-03 |
OK when in short travel position |
|
| Specialized |
Demo 8 |
05 |
OK - Flip ISCG adapter plate outbound |
|
| Specialized |
Demo 9 |
04-05 |
OK - Flip ISCG adapter plate outbound |
See Setup Instructions above |
| Specialized |
Enduro |
04 |
Flip ISCG adapter plate outbound and place 1mm BB
spacer between BB shell and ISCG adapter plate. |
|
| Specialized |
Enduro |
05 |
Flip ISCG adapter plate outbound and place 1mm BB
spacer between BB shell and ISCG adapter plate. |
See Setup Instructions above |
| Tomac |
204 Magnum |
04 |
Backplate needs to be ground down to clear main
pivot |
|
| Tomac |
M.O.A.H. |
05 |
OK |
|
| Transition |
Dirtbag |
04-05 |
Rotation not ideal, but works OK |
OK |
| Transition |
Preston FR |
04-05 |
OK |
OK |
| Transition |
Trail-or-Park |
04-05 |
No Fit - BMX BB shell not compatible yet |
No Fit - BMX BB shell not compatible yet |
| Turner |
Highline |
05 |
|
OK |
| Turner |
Six Pack |
05 |
|
OK |
| Turner |
5 Spot |
04-05 |
|
OK |
| Turner |
DHR |
01-02 |
Use older "A -Type" standard backplate -
the newer ISCG standard will not fit |
|
| Turner |
DHR |
03-04 |
Small modification on back side of backplate to
clear main pivot, space backplate out by 1 spacer when using 113 spindle |
|
| Turner |
DHR |
05 |
OK |
|
| Yeti |
DJ |
03-04 |
OK |
OK |
| Yeti |
AS-X |
03-04 |
OK |
OK |
| Yeti |
DH-8 |
03-04 |
OK |
|
| Yeti |
DH-9 |
03-04 |
OK |
|
| Yeti |
575 |
05 |
OK |
|
| Yeti |
4X |
04-05 |
OK |
|